
Instruction Manual
10
TO CHANGE BEER TUBE
Please replace the beer tube if it is damaged and causes beer leakage.
1.
Remove the cap by pressing the switch below the throat clamp.
2.
Pulling down the tap handle until it is full open and keep it opened this way.
3.
Draw out the tube from the tap and pull down the connection and tube.
4.
Replace the tube by a new beer tube and install the beer tube according to above steps, in reverse
procedure.
NOTES: Do not move other screws when processing tube replacement, otherwise, it may cause the beer leakage or
gas leakage.
MAINTENANCE
You can check the Troubleshooting Guide. It gathers causes of minor operation problems that you can
correct by yourself.
Trouble
Cause
Troubleshooting
The tap does not
work / can’t pour
beer out
1. The pouring tube is not well set in the
adaptor
2. No beer in the keg
1. Check and connect the tube to the adaptor
2. Change a new keg
Too much foam
pouring out
1. Use a wrong way to pour beer out
2. The beer temp is high (better at 3-5°C)
3. The keg is shaken before usage
4. Almost no beer in the keg
1. Use the right way to pour beer out
2. Cool the beer down to 3-5°C
3. Put the beer keg aside a while until no
bubble inside
4. Change a new keg
Beer flows out too
slowly
1. There's not much beer left. There's low air
pressure in the barrel
1. Change a new keg