LIVOLTEK GT1-3K-S, Руководство пользователя

Страница: 23 / 46

Figure 4.13 Installing the real panel
torque 2-2.5N.m ：
a Drill a hole in a marked position to a depth of 60 mm using a hammer drill with a
、
Ф 10mm
bit
b
、
Partially tighten an expansion bolt, vertically insert it into the hole, and knock the expansion
bolt completely into the hole using a rubber mallet.
Punch holes Install expansion bolts
Figure 4.12 Punch holes and install expansion (uint: mm)
Ø10,drilling depth 60 mm
：
Step 5 Align the rear panel with the holes, insert expansion bolts into the holes through the
real panel, and tighten the expansion bolts to a torque of 2-2.5 N·m using a torque wrench, as
shown in Figure 4.13.
20