LIVOLTEK GT1-3K-S, Руководство пользователя

Страница: 22 / 46

19
Step 3 Level the hole positions using a level, and mark the hole positions using a marker
(as shown in Figure 4.11).
Figure 4.11 mark the hole positions using a marker
level ruler
Step 4 Drill holes using a hammer drill and install expansion bolts, as shown in Figure 4.12.
DANGER
Before drilling the hole on the wall, ensure no damage on the
electric wire and/or water pipe inside the wall.
Step 1 Move out the rear panel from the packing case.
Step 2 Determine the positions for drilling holes (as shown in Figure 4.10) using the rear
panel.
Figure 4.10 Determine the positions for drilling holes unit mm) （ ：
3
K PV Inverter Dimensions for Single
MPPT Route Input
5
K
/
6K PV Inverter Dimensions for
Double MPPT Routes Input
249
Φ 8
160
7
4
9
4
299
160
Φ 8