LIVINOX LEH-2000I, Руководство пользователя

Страница: 35 / 37

35
Cleaning and Maintenance
Trouble
Resolve Important!
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass) 1. Switch off the power supply.
2. Apply a vitro-ceramic glass
cleaner while the glass is still
warm (but not hot!)
3. Rinse and wipe dry with a clean
cloth or kitchen towel.
4. Switch on the power supply to
the hob.
• When turn off the power supply of
hob, there will be no ‘hot surface’
indication but the cooking zone
may still be hot! Take extreme
care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
• Never leave cleaning residue on
the hob glass surface: the glass
may become stained.
Boil over, melts, and
hot sugary spills on
the glass
Remove these immediately with a
fish slice, palette knife or razor
blade scraper suitable for ceramic
glass of hob, but beware of hot
cooking zone surfaces:
1. Switch off the power supply.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or
spill to a cool area of the hob.
3. Clean the soiling or spill up with
a clean cloth or kitchen towel.
4. Follow steps 2 to 4 for ‘Everyday
soiling on glass’ above.
• Remove stains left by melts and
sugary food or spillovers as soon as
possible. Otherwise, they may be
difficult to remove or even
permanently damage the glass
surface.
• Cut hazard: when the safety
cover is retracted, the blade in a
scraper is razor-sharp. Use with
extreme care and always store
safely and out of reach of
children.
Spillovers on the
touch controls 1. Switch off the power supply.
2. Soak up the spill
3. Wipe the touch control area with
a clean damp sponge or cloth.
4. Wipe the area completely dry
with a kitchen towel.
5. Switch on the power supply to
the hob.
• The hob may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe
the touch control area dry before
turning the hob on.
Trouble-shooting Guide
1. There is no power to the appliance:
- Check whether there is a power cut off on current;
- Check whether the appliance be connected to electricity properly;
- Has the timer setting elapsed;
- Whether it reaches the longest cooking time setting and auto shut off;
- Whether there is liquid boiling over touch control panel and overflow protection
devices auto shut off;