LIVINOX LEH-2000I, Руководство пользователя

Страница: 12 / 37

12
Fix hob to cabinet: Insert the hob into the cabinet/work surface as below
diagrams, the mounted clips on the sides can secure your hob sturdily.
Assemble the Rubber Feet
Your hobs have rubber feet. There are 4pcs feet and 4pcs screw in one set packed
as accessories. Please assemble the feet to the hob by yourselves if needed. Find
the 4pcs feet first, then screw up the feet into the 4 holes reserved in the 4 corners
of base.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker.
The appliance have a large power rating and
must be connected to electricity by a Qualified Electrician .
Notes:
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni polar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified technician.