5
OPERATION
Insert bread slices into the bread slots – 1 slice per slot maximum.
Note: Make sure the crumb tray is completely positioned in place before using.
Plug the power cord / supply plug into the electrical socket outlet and switch the socket on.
Set the toasting time to your desired setting. There is 7-position level, the lowest
“1”
is for white
(minimal browning) and the highest
“7”
is for dark (highest browning). The bread slices can
generally be toasted to a golden color when in the middle position however this will vary depending
on the type of bread used. We suggest adjusting for a low / medium setting first.
Note:
1).
Toasting
colour
for
one
slice
is
darker
than
that
for
two slices of
bread
at
the
same
level.
2). If toasted continuously, toasting colour for subsequent bread is darker than that for the
initial slices at the same level.
Press
the
carriage
handle
down
vertically
until
it
latches
into
place,
the
toaster
will
begin
at
once.
Once
the
bread
has
been
toasted
to
the
preset
color,
the
carriage
handle
will
automatically
spring
up.
Note: If the bread carriage lever is not latching this indicates that the toaster is not connected to
the socket outlet or the socket outlet is switched off.
You can lift the carriage handle to observe the toasting color any time, during the toasted process. If
the toasting is adequate, you can press the
CANCEL
button to cancel the operation at any time.
Note: Lifting the carriage handle will not interrupt the toasting process.
If the bread has been taken out from freezer, Set color selector knob to your desired setting, then
press the carriage handle down vertically until it is latched in place, then press the
DEFROST
button
(the indicator of the button will be illuminated), in this mode it will be toasted to your desired colour
as normal despite the bread being initially frozen.
If you want to reheat the cold toasted bread, press the
REHEAT
button (the indicator light will be
illuminated). In this mode toasting time is fixed, once complete, the carriage handle will
automatically spring up and end up the reheating process.
