9
Gebruiks- en montagehandleiding inbouwbranders/ Operating and assembly instructions built in burners / manuel de montage et mode d'emploi
2 . Installation instructions according collection: built in burners
The Livin’ flame built in burner is supplied complete with pressure regulator and gas hose. You only need to
purchase a propane gasbottle. These can be purchased at your local gas supplier.
Built in dimensions for build in burners
1. Placing lavastones and eventual ceramic stones
I
f the Livin’ flame built in burner is installed properly in the wooden surrounding, you can place lava rocks and
eventual ceramic logs on the top. Grab first the small lava stones and place them on the ground. Every Livin’
flame is delivered with 1.5kg small lava stones and 1.5kg large lava rocks included. Take the small lava stones
without grit and place it gently on the model Repeat the same with the big lava stones and make sure it is
covered with lava rocks. Make sure you keep the ignition unit free of lava stones
.
If you place ceramic logs lay them as a campfire in the fire ring. Make sure the fire ring is minimal covered by
the logs. When the logs block the fire ring, there will be a dangerous situaties. The blockade of the fire ring will
affect the air flow of the ring and the flames will be different. This results in dangerous situations!
If you want to reorder the lava stones or ceramic logs, this is possible at your purchase address.
When you are going to use the Livin’ flame built in burner for the first time, make sure that the device is turned
at the highest setting for 15 minutes. In this way, the lava stones are heated through and this ensures that any
bumps or air bubbles will disappear from the lava rocks
When you want to move or cleanup the lava stones and ceramic logs, make always sure that they have cooled
down completely.
The lava rocks and logs can be scorching black in time. This has to do with soot formation which always occurs
in devices which show a yellow flame. This soot can be removed by blowing / vacuuming with a vacuum
cleaner. The carbon black may be also brushed off with a dry brush.
2. Placing the bottle
Livin’ flame built in burners are only tested and legal with propan gas. Make sure you bought a propan
gasbottle.
Make sure the gasbottle stand stabile on a non flammable surface.
The supplied hose is 1.5 m long . Place the gas bottle at a maximum distance of 1 meter from the built in
burner. Be carefull by placing the gashose, people and pets can stumble over it. Indeed place the cylinder
therefore always at a place where walking along is not possible and where children and pets cannot reach.
350
mm
350 mm
350 mm
350
mm
square burner
straight burner
550 mm
170 mm
550 mm
170 mm
