24
SECTION 4: MAINTENANCE
Warning
: Before any maintenance and/or cleaning the exterior of the fireplace, disconnect the unit
from the power supply and leave until cooled off.
4.1
Remote Handset Battery Replacement
Full battery
Half full battery
When the batteries are out of power and need replacing immediately
Battery replacement is recommended after 1 year. The batteries are 3V batteries. Dispose of old
batteries at an appropriate recycling facility.
4.2
Cleaning the Fireplace
You can clean the exterior of the fireplace with a soft, damp, lint-free cloth. Do not use cleaning or
polishing products. To remove fingerprints or other marks on the front glass panel, use a soft, damp,
lint-free cloth with a good quality household glass cleaner. The front glass panel should always be
completely dried with a clean, lint- free cloth or paper towel.
Caution
: Do not use abrasive cleaners on the glass panel. Do not spray liquids directly onto any surface of
the unit.
Caution
: Other maintenance must be performed by a competent electrician.
4.3
Environment
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and well-being. When replacing old appliances with new
ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
This fire complies with the Safety Standards EN 60335-1 and EN 60335-2-30 which covers the essential
requirements of the Low Voltage Directive 2014/35/EU and the EMC standards EN 55014-1; EN 55014-
2; EN 61000-3-2 and EN 61000-3-3 which covers the essential requirements of the European Electro
Magnetic Compatibility 2014/30/EU and the RED standards EN300220-2, EN301489-1, EN301489-3 and
EN6247 which covers the essential requirements of the European Radio Equipment Directive
2014/53/EU.
GIMEG Nederland B.V. – Strijkviertel 27 – 3454 PH – De Meern – The Netherlands
Control PCB
Remote Control Receiver
Remote Control Transmitter
Hardware:
RC01-053A01 V0
Software: V0
Hardware: WH-5694 V1.2
Frequency: 38K
Standby current: <10uA
Hardware: WH-5694 V1.2
Software: RCS17A V0
