Recalling Stored NVP Values
1.
Connect one end of the cable to the FaultChaser. Use connection accessories
according to the type of cable you are testing.
2.
Press the POWER button to turn the unit ON.
3.
Press the MEM button to recall the stored NVP Value. The LCD display screen,
illustrated in Figure 4 below, shows the following:
•
The current storage location (M1 or M2) and the NVP value last saved in the selected
location.
•
The adjustment indicator icon appears in the screen indicating NVP is editable.
•
The cable length calculated during the last test.
Figure 4
. LCD Display Screen in Memory Storage
Note: Single presses of the MEM button toggles between the two memory storage
locations.
Cable length does not update automatically when toggling between the two memory
storage locations. To achieve an accurate length measurement when selecting a
different stored NVP value, a test must be run. Refer to the Using Test Mode section
for instructions on measuring cable length.
18
