Memory Storage
When the MEM button is selected, a series of values and icons appear in the LCD
display screen. See Table 5 for a description of the display screen updates when
Memory Storage is in use.
Table 5.
Memory Storage Icons and Values
Icons and
Values
Description
Memory Storage
Locations
The unit has two memory storage locations: M1 and M2. The
selected storage location appears above the NVP value in the
lower left corner of the LCD display screen.
NVP Value
The NVP value for the selected storage location appears next to
the “NVP” icon in the lower left corner of the LCD display screen.
Adjustment Indicator
The adjustment indicator icon demonstrates that the NVP value
can be adjusted.
•
The icon, displayed as two Up/Down arrows, appears to the
left of the NVP value.
Cable Length
The cable length, displayed in feet or meters, appears in the
upper right corner of the display screen. When a cable is not
attached to the FaultChaser the length will read “0”.
Note:
Refer to the Using Memory Storage section to learn how to store multiple NVP
values for testing purposes.
Tone Mode
When the TONE button is selected, two musical notes blink in the lower right corner of
the LCD display screen to demonstrate the unit is set to tone tracing. The following
icons appear in the display screen when Tone Mode is in use:
•
Cadence
– There are four cadence options: HI, LO, HL1, and HL2. The last selected
cadence appears in the top row of the display screen.
•
Adjustment Indicator
– Two arrows appear to the left of the selected cadence to
indicate that cadence can be adjusted.
Note: A tone probe is used for the tone tracing functionality of the FaultChaser. This
item is sold separately. Refer to the Additional Accessories section for a listing of
available products.
11
