Charging LiveU Solo HDMI
• LiveU Solo HDMI contains an internal battery that
enables a minimum of
two hours
of standalone
operation when fully charged. LiveU recommend
charging the battery for at least
4 hours
before first
using LiveU Solo HDMI.
• There are 3 methods to charge the battery via
the
DC IN
connector on the side of LiveU Solo
HDMI.
◦ Use the supplied 12 V AC Power Adapter.
◦ Use the optional RLACS300 dual supply cable
to power LiveU Solo HDMI from two different
power sources such as a battery pack or the
car's own power supply, meaning the LiveU
stays on and stays charged after the vehicle
ignition is switched off.
◦ Use the optional RLCAB010D cigar plug power
supply.
◦ More information on these accessories are
available
.
• While charging, the LED near the DC connector will
be
red
.
When the battery is fully charged, this LED
will turn
green
.
• The battery charges even when the unit is turned
on.
• It is good practice to keep the unit plugged into a
power outlet when it is not in use, ensuring it is
charged and ready for operation at a moment’s
notice.
• The battery status is displayed on the LCD display
screen and also within the Solo Web Portal when
Online.
Configuration
Before live streaming from VBOX Video HD2 HDMI, it is necessary to configure the following:
1.
Configure VBOX Video HD2 HDMI for HDMI output
2.
3.
4.
Connect VBOX Video HD2 HDMI and LiveU Solo HDMI
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/Knowledge_Base/
Live_Streaming_VBOX_Video_HD2_Using_LiveU_Solo_HDMI
6
