9
GB/IE/NI
Initial use / Maintenance and Cleaning / Disposal / Information
Safety / Preparation / Mounting the light / Initial use
Press the dimmer switch
10
once to switch the
light off.
Attention!
The light is still in standby mode.
Press the wall switch to switch the light all the
way off.
With the light in stand-by mode it can be
switched on by pressing the dimmer switch
10
once.
Maintenance and Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the light to cool down
completely.
Only use a dry, lint-free cloth for cleaning. Do
not use solvents, benzene or similar substances.
They could damage the light.
Replace the fuse or switch on the circuit
breaker (Position I) inside the fuse box.
Disposal
The package and packaging materials
consist entirely of environmentally-friendly
materials. They can be disposed of at
your local recycling facility.
The symbol of the wheelie bin with a line
through it means that in the European
Union the product has to be disposed of
in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Products marked in this manner must not be disposed
of along with normal household waste, but must be
taken instead to a recycling collection point for
electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and protects the environment.
Information
Warranty
A 36 month warranty is extended for this appliance
at the time of purchase. The appliance has been
manufactured with care under strict quality control.
During the warranty period any defects in material
or manufacture will be replaced free of charge. In
the event of a defect during the warranty period,
please send the appliance to the service address
listed, indicating the following item number:
14117008L / 14116802L / 14117108L /
14116902L.
Expendable parts (such as bulbs) and damage
caused by improper handling, failure to observe
the instructions for use or modification by unauthor-
ised persons are excluded from the warranty. The
performance of services under the warranty does
not extend or renew the warranty period.
Declaration of conformity
This product fulfils the requirements of the applicable
European and national directives. Conformity has
been demonstrated. The relevant declarations and
documents are held by the manufacturer.
Manufacturer / Service
Briloner Leuchten GmbH
Im Kissen 2
59929 Brilon
Germany
Tel.:
+49 (0) 29 61 / 97 12–800
Fax:
+49 (0) 29 61 / 97 12–199
E-Mail: [email protected]
www.briloner.com
IAN 279115
Please have your receipt and item number (e.g
EAN 12345) ready as your proof of purchase
when enquiring about your product.
