8 GB/IE/NI
Initial use / Maintenance and Cleaning / Disposal / Information
Safety / Preparation / Mounting the light / Initial use
The illuminant in this light is not replaceable; if
the illuminant reaches the end of its life, replace
the entire light.
For your safety
Install the light so it is protected from moisture,
dirt and extreme heating.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never use the light if you are having difficulty
concentrating or do not feel well.
Familiarise yourself with all instructions and
diagrams in this manual as well as with the
light itself before use.
Preparation
Required tools and material
The tools and materials specified are not included.
This information and these values are non-binding
and are only provided as a reference. The nature
of the material is determined by the individual local
conditions.
- Pencil / marking tool
- Voltage tester
- Screwdriver
- Electric drill
- Drill (approx ø 6 mm)
- Side cutting pliers
- Ladder
Mounting the light
CAUTION! RISK OF ELECTRIC SHOCK!
Prior to installation, remove the fuse or switch off
the circuit breaker in the fuse box (Position 0).
Remove the screws
3
visible at the side of the
connection housing
5
and remove the mount-
ing bracket
2
at the back.
Use the slotted holes on the mounting bracket
2
to mark the bores.
Now drill the fixing holes (approx. 6 mm, depth
approx. 40 mm). Be sure not to damage the
supply line.
Insert the plugs
1
into the bores.
Fasten the mounting bracket
2
with the pro-
vided screws
4
.
Open the junction box
6
.
Feed the mains cable (external)
9
through the
protective tube
8
.
Now use the lustre terminal
7
to connect the
connection cable for the light to the mains con-
nection cable (external)
9
.
Note:
Be sure to connect the individual leads
on the mains connection cable (external) cor-
rectly: live wire, black or brown = symbol L,
neutral wire, blue = symbol N, protection class
II / .
Be sure the protective tube
8
is seated cor-
rectly at the junction box
6
.
Close the junction box
6
.
Now use the screws
3
to fasten the light to
the mounting bracket
2
.
Your light is now ready to use.
Reinsert the fuse or switch the circuit breaker
back on.
Initial use
Model 14117008L / 14116802L:
Use the wall switch to switch the light on or off.
Use the wall switch to dim the light to the re-
spective levels.
Model 14117108L / 14116902L:
Use the wall switch to switch on the light.
Note:
The light will automatically be set to the
brightest setting when switching the light on.
The dimmer switch
10
is variable. Press and
hold the dimmer switch
10
until the light is at
the desired brightness.
The dimmer switch
10
will only reduce the
brightness. Switch the light off and back on to
reset the dimmer.
