7
GB/IE/NI
Introduction / Safety
Introduction
Parts Description
1
Wall plug
2
Mounting bracket
3
Screws (connection housing)
4
Screws (mounting bracket)
5
Connection housing
6
Junction box
7
Lustre terminal
8
Protective tube
9
Mains connection cord (external)
10
Dimmer switch (model 14117108L /
14116902L)
Technical Data
Item no.:
14117008L or 14116802L or
14117108L or 14116902L
Operating voltage: 230 - 240 V~ 50 Hz
Rated lamp power: LED 20 W
Illuminant:
LED module (permanent)
Protection class:
II /
Safety
Safety Notices
Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
liability for property damage or personal injury
due to improper handling or failure to comply with
the safety instructions! Only use the included parts,
using other parts will void the warranty.
This product may be used by children aged 8
years and up, as well as by persons with reduced
physical, sensory or mental capacities, or lack-
ing experience and/or knowledge, so long as
they are supervised or instructed in the safe use
of the product and understand the associated
risks. Do not allow children to play with the prod-
uct. Cleaning and user maintenance should not
be performed by children without supervision.
Do not leave the light or packaging material ly-
ing unattended. Plastic film/bags, plastic parts
etc. are dangerous for children to play with.
Avoid the risk of fatal injury
from electric shock
Ensure that a qualified electrician, or a person
trained to carry out electrical installations, per-
forms the electrical installation.
We assume no liability for property damage or
personal injury due to improper handling or
failure to observe the safety notices!
Never use the light if any defects have been
identified.
Prior to installation, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse box.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Prior to installation, verify the available mains
voltage corresponds with the operating voltage
required for the light (230 - 240 V~ 50 Hz).
Be sure not to damage any wires during instal-
lation.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Model 14116902L / 14117108L:
The length of the pendant light is not adjustable.
Prevent fire and
injury hazards
To prevent burns, be sure the light is switched
off and cooled down before touching it.
Do not attach the light to a damp or conductive
substrate.
Do not look directly into the light source (lamp,
LED, etc.). Do not look into the light source (lamp,
LED, etc.) with an optical instrument (e.g. mag-
nifier).
This light is only suitable for indoor
use in dry and enclosed spaces.
