- 3 -
Note:
For damage caused by ...
• Opening the base of the table lamp
• Repair attempts carried out by non-qualified
personnel
• Improper use of thetable lamp,
no liability and/or warranty will be accepted!
Note:
In the event of a malfunction (the table lamp swit-
ches itself off or changes the brightness level on its
own) due to fast electrical transients (surge) resp.
electrostatic discharge, the product must be reset in
order to restore normal operation.
Disconnect the appliance from the mains power sup-
ply by withdrawing the plug. Then reconnect it.
This appliance could lose its dimmer function upon
contact with conductive objects. As soon as the
conductive object is removed, the appliance func-
tions again without problem.
2. Proper Use
The table lamp is intended exclusively …
• as an illumination and decorative object for interior
rooms (no damp rooms)
• for domestic, non-commercial use.
3. Items supplied
Table lamp
Operating instructions
4. Technical data
Power supply:
230-240 V ~ 50 Hz
Power consumption:
40 W
Bulb:
40W 230V E14
Protection class:
II
Maintain a minimum distance of 50 cm
to illuminated areas.
5. Controls
1
Bulb (not supplied)
2
Lamp shade
3
Socket
4
Base with touch sensor as on/off switch
and dimmer
5
Power cable
6
Covering cap (KH4113 only)
Illustrations of the KH4112 and KH4114 table
lamps are on the front-out fold side. An illustra-
tion for the table lamp KH4113 is to be found
on the rear fold-out side.
IB_64705_KH4112_14_LB6 26.04.2011 9:48 Uhr Seite 3
