LIVARNO KH 4112, Руководство по эксплуатации

Страница: 6 / 38

- 4 -
Otherwise there is a risk of a
short-circuit or fire!
7. Preparing the table lamp
for use
1. Carefully remove the table lamp from the packa-
ging.
2. KH 4112/KH 4114: Screw the light bulb 1
(not supplied) into the bulb holder
3
.
3. KH 4113: Loosen the covering cap
6
from the
table lamp. Carefully remove the lampshade
2
upwards from the table lamp. Screw the bulb
1
(not supplied) into the bulb socket
3
. Replace
the lampshade
2
back onto the table lamp. Se-
cure it with the help of the covering cap
6
.
4. Applies to all models: Unwind the power cable
5
to its full length. Insert the power cable
5
into a power plug.
The table lamp is now ready for use.
8. Using the table lamp
• Switch the table lamp on by touching the base 4
with a finger (KH4113: touch the base
4
or the
stand).The table lamp now lights up at the lowest
brightness level.
• To switch it to the second brightness level: touch
the base
4
a second time.
• To switch it on to the third brightness level: Touch
the base 4 once again.
• To switch the table lamp off: touch the base 4
once again.
If you do not wish to use the table lamp for an ex-
tended period of time: Remove the power cable
5
from the power socket. To avoid damage, be care-
ful not to kink the power
5
cable.
9. Changing the light bulb
Should the bulb
1
in the table lamp be defect, it
must be exchanged for a new one. Additionally:
• Remove the power cable
5
of the table lamp
from the power socket.
If the table lamp was previously switched on: Allow
the lamp shade
2 and the light bulb 1 at least a
half-hour to cool down before you continue.
The risk of burns is ever present!
• KH 4112/KH 4114: Screw the light bulb
1
out
of the bulb holder
3
in an anti-clockwise direction.
• KH 4113: Loosen the covering cap
6
. Careful-
ly remove the lampshade
2
upwards from the
table lamp. Then screw the old light bulb
1
out
of the bulb holder
3
.
• Screw a new light bulb
1
into the bulb holder
3
.
Use exclusively light bulbs of the type E14, 40 W.
• KH 4113: Replace the lampshade
2
onto the
table lamp. Secure it with the help of the cove-
ring cap
6 .
• Applies to all models: Insert the power cable 5
into a power socket. The table lamp is once
again ready for use.
IB_KH4112_14_49241_LB3 17.05.2010 16:00 Uhr Seite 4