LIVARNO KH 4112, Руководство по эксплуатации

Страница: 5 / 38

- 3 -
Note:
For damage resulting from …
• opening of the table lamp base / the transformer
housing
• attempted repairs made by non-qualified personnel
• improper use of the table lamp
no liability/warranty is accepted!
Note:
In the event of a malfunction (the table lamp swit-
ches itself off or changes the brightness level on its
own) due to fast electrical transients (surge) resp.
electrostatic discharge, the product must be reset in
order to restore normal operation.
Disconnect the appliance from the mains power sup-
ply by withdrawing the plug. Then reconnect it.
2. Proper Use
The table lamp is intended exclusively …
• as an illumination and decorative object for interior
rooms (no damp rooms)
• for domestic, non-commercial use.
3. Items supplied
Table lamp
Operating instructions
4. Technical data
Power supply: 230-240 V ~ 50Hz
Power consumption : 40 W
Bulb: 40W 230V E14
Protection class: II
Maintain a minimum distance of 50 cm
to illuminated areas.
5. Controls
1
Bulb (not supplied)
2
Lamp shade
3
Socket
4
Base with touch sensor as on/off switch
and dimmer
5
Power cable
6 Covering cap (KH4113 only)
Illustrations of the KH4112 and KH4114 table
lamps are on the front-out fold side. An illustra-
tion for the table lamp KH4113 is to be found
on the rear fold-out side.
6. Select a suitable
installation site
Always place the table lamp on a solid, level, slip-
proof surface.
To avoid malfunctioning, do not place the table
lamp on metallic surfaces.
Do not place any easily inflammable/combustible
materials in the immediate vicinity of the table lamp
while it is switched on. Do not cover the table lamp
while it is switched on. Also, do not hang any ob-
jects over the table lamp.
Do not place the table lamp on metallic objects.
IB_KH4112_14_49241_LB3 17.05.2010 16:00 Uhr Seite 3