11
GB
Safety / Initial use
Ensure the correct polarity (+ 12 V ~ <-> +
12 V ~) here.
Then press one end cap
5
at a time onto the
ends of the plug connection
4
(See Fig. C).
Check the correct positioning.
Be sure to cover the open end of the LED tape
3
with the adhesive strip
7
if you do not
wish to connect the end after trimming the tape.
installing the LED strip
Note:
Ensure that the installation area is clean,
grease-free and dry. Otherwise the functionality of
the adhesive strip may be impaired.
Note:
Ensure that a plug socket is located in close
proximity to the installation area.
Choose a suitable installation area (window
etc.).
Remove the protective foil from the reverse side
of the LED strip
3
.
Stick the LED strip
3
with the adhesive strip
onto the installation area and press it on firmly.
Remove the protective foil from the reverse side
of the cable hold
6
.
Stick the cable hold
6
onto the desired posi-
tion.
Squeeze the mains cable
2
into the cable
hold
6
.
Insert the mains adapter
1
into the plug socket.
Your light is now ready to use.
Maintenance and cleaning
DANGEr To LiFE BY ELEc-
Tric ShocK!
Disconnect the lights from the power
supply before performing any work on the LED
strip
3
.
Remove the mains plug
1
from the mains socket.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Use a dry, lint-free cloth to clean the LED strip
3
.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at
your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the Euro-
pean Union, the product has to be dis-
posed of in a separate refuse collection. This applies
to the product and to all components bearing this
symbol. Do not dispose of products bearing this
symbol in your normal household waste, but instead
they must be taken for recycling to a collection site
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and protects the environment.
Warranty and Service
Warranty Declaration
This product has a 3 year warranty from the date
of purchase, which applies only to the original buyer
and is non-transferable. Please keep your receipt as
proof of purchase. The warranty applies to material
or manufacturing defects only. It does not cover
worn items or damage caused by improper use. Any
modifications will void the warranty. This warranty
does not limit your legal rights. Please phone the
service centre for warranty claims. This is the only
way to return your product free of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Tel.:
+49(0)2961 / 9712-800
Fax:
+49(0)2961 / 9712-199
E-Mail: kundenser[email protected]
www.briloner.com
iAN 273729
... / Installing the ... / Maintenance and Cleaning / Disposal / Warranty and Service
Содержание LED ROPE LIGHT
Страница 3: ...A 1 6 2 3 12V 12V 12V 12V B C 5 4 3 3 7...
Страница 4: ......
