LIVARNO LUX 8000.006.080, Инструкции по эксплуатации и безопасности

Страница: 20 / 80

21 GB/IE
Plug the mains plug
9
into
a properly installed socket.
Your lamp is now ready for use.
Adjusting the lamp
Note: Only change the alignment
of the lamp when it is switched off.
You can adjust the LED table lamp
to the lighting conditions you re-
quire. To do so, use the 3 joints:
1. Swivel joint with lamp base
7
: the lamp arm
2
can be
turned approx. 35° in both
directions from the midpoint.
2. Lower tilt joint: with this you
can move the lamp arm
2
forwards or backwards.
3. Upper tilt joint: with this you
can move the lamp head
1
upwards or downwards.
Switching the
lamp on / off
Switch the lamp on or off
using the ON / OFF switch
3
on the lamp base
7
.
All you need to do here is
press it with your finger
(touch button).
Selecting the
light colour
You can set the colour of the light
in 3 stages from warm-white
3000 K to cold-white 6500 K.
Touch the light colour selec-
tion button
4
for this. When
you switch the lamp on, it will
automatically be set to the
last light colour to have been
used.
Dimming
The light has 6 dimmer settings.
To dim the light, simply touch the
Dim
5
button on the base
7
.