7
GB
Safety / Start-up / USB plug / Maintenance and Cleaning
that the light is switched off and has cooled
down before touching it. Lamps develop a lot
of heat in the area of the lamp head.
Allow the light to cool completely.
Do not look directly into the light source (lamp,
LED, etc.).
The lamp is not replaceable.
This light is not suitable for dimmer
or electronic switches.
In order to disconnect the light completely from
the power supply, the light must be removed
from the socket.
Do not leave the light or packaging material
lying unattended. Plastic film or bags and
Styrofoam etc. can turn into dangerous toys for
children.
The lamp‘s light source is not replaceable, the
entire light needs to be replaced if the light
source reaches the end of its service life.
Do not cover the lamp with objects. Excessive
heat can result in a fire.
Safe working
Install the lamp out of the reach of children.
Install the light so that it is protected from mois-
ture, dirt and excessive heat temperature.
Constant attentiveness is required! Always pay
attention to what you are doing and act with
common sense. Never use the light if you are
having difficulty concentrating or do not feel
well.
Familiarise yourself before use with all instructions
and diagrams in this manual as well as with
the light itself.
Start-up
Switching on and off
Plug the night light into the socket.
Your light is now ready to use.
Switching the light on:
Set the switch
1
to the „
AUTO
“ position.
– The twilight switch is switched on.
– The function only operates if there is darkness.
Set the switch
1
to the „
ON
“ position.
– The lamp is permanently switched on.
– The twilight switch is switched off.
Switching the light off:
Set the switch
1
to the „
OFF
“ position.
– The lamp is permanently switched off.
USB plug
Your night light features a USB connector
3
on the housing. With this USB connector
3
you can operate any devices that may be
operated using a USB connector.
The charging function works during all three
settings (
ON / OFF / AUTO
).
The night light is suitable for USB cables up to
5 m long.
Maintenance and Cleaning
DANGER OF ELECTRIC
SHOCK!
Set the night light to the „OFF“ position.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the night light to cool
down completely. Remove the inserted USB plug if
necessary.
DANGER OF ELECTRIC
SHOCK!
For electrical safety, never clean the light
with water or other liquids, nor immerse it in water.
Remove the night light from the socket.
Do not use solvents, petrol, etc. Otherwise the
light will be damaged.
