9
GB/IE/NI
Clean the contacts on the battery / rechargea-
ble battery and in the battery compartment
before inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Q
Bringing into use
Q
Inserting / replacing the batteries
Note:
Remove the insulating strips
7
before using
the product for the first time.
Note:
Switch the product off before you insert or
remove the batteries.
Turn the battery compartment cover
3
anticlock-
wise and take it off the battery compartment
2
(see Fig. A).
Insert the (new) batteries into the battery
compartment.
Note:
Make sure you fit the batteries the right
way round (polarity). The correct polarity is
shown inside the battery compartment.
Put the battery compartment cover back in
place on the battery compartment and turn it
clockwise to tighten it (see Fig. B).
Q
Installing the light
Pull off the protective film from the self-adhesive
pad
4
of the battery compartment cover
3
(see Fig. C).
Attach the light in the desired location.
Note:
The substrate should be dry, smooth and
free of dust and grease.
Note:
For the first 24 hours after installation do
not remove the self-adhesive pad. Otherwise
the self-adhesive pad will lose its ability to stick.
Q
Switching on / off
Press the light in the middle to switch it on or off.
Q
Cleaning and care
Use a dry cloth to clean the light – never use
petrol, solvents or cleaners that attack plastic.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
