5
4
EN
IE
EN
IE
Congratulations!
You have chosen a high-quality product. Before
using the product for the first time, you should
make sure that you are familiar with it.
For this purpose, please read the
following assembly and safety
instructions carefully.
Use the item only as described and for the
specified areas of use. Keep these assembly
instructions in a safe place. If you pass on the
product to others, please make sure to hand over
any related documents.
Scope of Delivery (Figure A)
1 × table top 1
4 × table legs 2
4 × floor protector rubber pads 3
4 × washers 4
1 × assembly instructions
Technical Data
Maximum load:
5 kg
Dimensions:
Height:
44 cm
Ø
approx. 40 cm
Intended Use
The item is not intended for commercial use. The
item is designed for indoor use.
Symbols Used
Production date
(month/year):
04/2020
Apply weight to the centre of
the table only.
Never sit or stand on the table.
Safety Instructions
Risk of death!
Never leave children unattended with the
packaging material, to prevent any risk of
suffocation.
Risk of injury!
Before using the item, make sure it is set up in
a stable position.
Place the item on an even surface.
The item is not a toy and must be used with
adult supervision only.
Do not allow children to climb onto the item
or play with it! Make sure that children or any
other persons do not lean against the item or
use it for pulling themselves up. The item may
fall over.
Before each use, check the item for any dam-
age or wear.
Never sit or stand on the table.
Assembly (Figure B)
1. Place the table top 1 onto a soft and even
surface (
Caution:
The table top may be
scratched by hard surfaces!).
2. Screw the four table legs 2 to the table top
in clockwise direction. Attach the floor pro-
tector rubber pads to the table legs’ standing
surfaces. Use one floor protector rubber pad
3 for each table leg (Figure
B
).
3. Now turn the item over and position it on the
ground (Figure
C
).
4. Use the washers 4 if the table is not stable.
Put a washer over the thread of the screw on
the table leg and then attach the table leg
(Figure
D
). After you have added the washer,
check if the table is stable. If the table con-
tinues to be unstable, use another washer on
another table leg.
Storage, Cleaning
If you are not using the item, please store it at
room temperature in a clean and dry place.
Use water only for cleaning the item, and use a
cleaning cloth to wipe it dry.
IMPORTANT!
Do not use any aggressive
cleaning agents.
Disposal Information
Please dispose of the item and the packaging
materials in line with the applicable local regula-
tions. Packaging materials such as film bags must
be kept out of the reach of children. Please keep
the packaging materials where children cannot
access them.
Dispose of the item and its packaging
in an eco-friendly manner.
The recycling code is used to identify
different materials to allow for them to
be provided for recycling. The code
comprises the recycling symbol – that
is intended to illustrate the recycling
circuit – and a number identifying the
material.
Information About Warranty
and Service Processing
The item was produced with great care and un-
der constant monitoring. We grant a three-year
warranty for the item, starting with the purchase
date. Please keep the receipt. The warranty
applies for material and manufacturing defects
only, and it does not cover damage due to
improper or incorrect use. Your statutory rights, in
particular under warranty law, are not affected
by this warranty.
In the case of any complaints, please contact us
via our service hotline indicated below or get in
touch via email. Our service staff members are
going to coordinate the further process with you
as swiftly as possible. We will always provide
personal advice. The warranty period is not
extended if any repairs are carried out under the
warranty, statutory warranty, or as a gesture of
goodwill. The same rule applies for any replaced
or repaired components. Repairs performed
after the end of the warranty period are subject
to a charge.