Little Pro Rider LPR 12 JNR MX, Руководство пользователя

Страница: 26 / 44

OWNERS MANUAL | Model: LPR12 Jnr MX V1.0
25 | P a g e
Maintenance Procedures:
Work safe and to your states safe work procedures. Follow local environmental policies and
dispose of any waste according to local council rules and regulations. All work is to be
conducted with the battery disconnected, power should only be connected for those tests that
require power on to complete the test.
1) Throttle test:
The twist throttle must always operate smoothly and return freely.
To test- Ensure the bike is
off using the On/Off switch. Twist to full throttle
and then release. The throttle should operate smoothly and spring return.
Now turn on bike. Lift up the rear wheel off the ground with the handle on the back of the seat,
twist throttle and test if the wheel spins. Let go throttle and wheel should coast to a stop.
Turn
off bike after test. Replace or clean throttle assembly if necessary.
2) ON/OFF switch test:
The On/Off switch must be in good working order at all times.
The On/Off switch has a very simple operation. Press once to turn on bike
power and press again to turn off bike power. When “on” the switch will
depress “in” and when “off” the switch will depress “out”.
Caution: It is important that this switch works correctly as it is also used as the safety kill
switch.
Turn on bike. Battery indicator lights should go on. Twist throttle and rear wheel should rotate.
Turn off bike. Battery indicator lights should go off. Twist throttle, and rear wheel should
NOT
rotate.