Heavy Duty Power Cord
Stainless Steel Handle
Stainless Steel Screws
Motor Designed
for Maximum
Performance
Automatic Operation
with Pressure Switch
(or with piggyback Remote Float Switch – not shown)
CRS
Non-Clog
Impeller
Engineered
to Enhance
Performance
and Reliability
Cast Iron Housing
w/Protective Epoxy
Coating to Resist
Corrosion
Oil-Filled to
Dissipate
Heat for
Extended
Pump Life
Features
n
Cast iron pump housing with protective epoxy coating
for corrosion resistance
n
Oil-filled motor housing for lifetime lubrication and
rapid heat dissipation
n
1/3 HP shaded pole motor
n
Stainless steel screws, bolts and handle to protect against
corrosion
n
Mechanical seal (stainless steel spring, nitrile parts, carbon
and ceramic faces) to assure maximum protection against
pump failure
n
Bearings: Upper and lower sintered sleeve bearings for
extended motor life
n
Thermal overload protection
n
Manual and automatic models
n
Automatic operation with pressure switch activates pump
when water level is between 7" and 10". Pump shuts off
when water level falls to between 1" and 4" (pressure
switch is non-adjustable)
n
Automatic operation with piggyback mechanical float
switch activates pump when water level is between 9"
and 10-1/2". Pump shuts off when water level falls to
between 2" and 3" (pumping range is adjustable)
n
115 volt models
Big John
Submersible Sump Pump
For residential and light commercial use, the
Model 6 Series sump pumps provide efficient and
reliable service. For extended or continuous use
in moving large volumes of water, these pumps
feature a 1-1/2" discharge with a maximum lift of
18', a polycarbonate cover and a polypropylene
volute/base. A choice of manual or automatic
versions with various switch configurations provides
user with the right pump for their needs.
6 Series