background image

2

Thank you for buying the Fargo Bunk Bed.
Before beginning assembly, please take a few minutes to read these instructions.

Lay the parts out on a clean, soft, flat surface (such as a carpeted floor) and compare with the 
parts check list on the next page. Do not throw away any packaging until you are sure that you 
have all the parts.

The product must be assembled by an adult. There are small parts so keep small children 
away from the assembly area. Some stages of assembly require more than one person.

This product is designed to conform to BS EN 747: 2012
Maximum Mattress size for the Upper Bunk: 191cm x 90cm x 21cm (6’3’’ x 3’0’’ x 8’’)

If, for any reason, you wish to return the product, you must disassemble the components and 
use the original packaging.

If you have a problem with this product, please call our Customer Service Team who will be glad to 
help.
We can usually provide replacement and / or spare parts promptly; it will help us if you can identify the 
specific part using the check list in the next section.

 Product Safety

Care of your Product

 Welcome 

 Product Care

 Our Customer Service Number:  01985 300588

l

Periodically check that all assembly fixings are tightened properly, care should be taken to 

ensure that no fittings are loose.

l

The furniture must be set up on an even and stable surface.

l

Keep away from direct sources of heat, such as electric, gas or coal fires.

l

Do not allow children to climb on the furniture. Using this furniture other than for its 

intended purpose could cause damage to the structure or serious injury to your child.

l

The Bunk should not be used if any structural part is broken or missing.

l

The upper Bunk is not suitable for children under six years old due to the risk of falls.

l

Do not attach items such as ropes, strings, cords, harnesses or belts etc to avoid the risk of 

strangulation.

l

Warning: Children can become trapped between the bed and the wall. To avoid the risk of 

serious injury the distance between the top safety barrier and the wall must not exceed 

Clean your Bunk by wiping with a damp cloth & drying with a soft cloth. 
Never clean with abrasives, chemical cleaner or household polishes.

Take care when handling or moving the furniture. Careless handling can damage wooden furniture, Try 
to lift rather than drag.

3

1x Rear Guard

1x Front Guard

2x Lower Mattress Rails

1x Upper Mattress Rail (Ladder Right) 

(Top edge view)

 Parts Check List 

(not to scale)

2x Allen Key 

You will also require a Screwdriver 

(not supplied) 

8 x Bolts (60mm)

10x Bolts (80mm)

 12 x Bolts (35mm)

2x Foot Ends

(Top Bunk Ends)

2x Mattress Bases

1x Mattress Rail Stile

4x Bolts (18mm)

2x Ladder Hooks

16x Bolts (100mm)

CR

4x Wooden Caps

2x Head Ends

(Bottom Bunk Ends)

(Top edge view)

(Top edge view)

24 x Barrel Nuts

2x Screws (16mm)

60x Screws (32mm)

2x Sleeve Nuts

1x Upper Mattress Rail (Ladder Left) 

4 x Screws (38mm)

2x felt strips

Ladder Legs x2

(Left & Right)

Ladder Treads x4

4 x washers 

4x Locking Pins

16x Dowels

Содержание Fargo BBD001







Отзывы: