11
ENG
Each time you touch the key M, the index of numbers of the memory cell will increase by one and
then indicate the contents of the specified memory location on the display.
PURIFICATION MEMORY OF THE DEVICE
It is necessary to touch the key M and hold it for more than 5 seconds in order to remove all
stored measurement results from the memory of device. The display shows symbols «Clr» and
will clean the entire memory.
ERROR REPORTS
Indication
Probable cause
Remedies
Not wearing the cuff properly.
The measurement could not be done due to the movement with your
hand or talk during measurement.
At the expressed rhythm disturbances of heart rate, deeper vascular
sclerosis, weak pulse wave , the correct blood pressure measurement
can be difficult.
Make sure the cuff is wearing properly and repeat the whole procedure
of measurement.
Repeat the measurement, while fully respecting the recommendations
of this manual.
In these cases, it is necessary to get advice on the use of an electronic
device from a licensed physician.
Discharged batteries.
Replace all the batteries with new ones.
Fig. 6
