11
ENG
MEMORY CLEARING
To delete all values stored in the memory, press the
M Button and hold it down for more than 5 seconds.
Symbols “Clr” will appear on the screen and all values
will be deleted from the memory (Fig. 18).
INFORMATION ABOUT ERRORS
Indication
Likely cause
Methods of correction
The arm cuff is applied
incorrectly or the air tube plus
is inserted not tightly enough.
M e a s u r e m e n t s c a n n o t
be made due to hand
movement or talking during
measurements.
Be sure that the arm cuff is
applied correctly and the plug is
inserted tightly. Repeat the whole
measurement procedure.
Repeat the measurement follow-
ing strictly the recommendations
of this Manual.
Batteries are discharged.
Replace the batteries for new
ones.
CARE, STORAGE, REPAIR AND DISPOSAL
1. Keep this Device from exposure to higher humidity, direct sunlight,
shocks, vibration. THIS DEVICE IS NOT WATERTIGHT.
2. Do not keep and use this Device near heating installations and open
fi
re.
3. If the Device was stored at a temperature below the freezing point, keep
it at least for 1 hour in some warm place before use.
Fig. 18
