10
ENG
The Device is designed to store automatically the results of each measure-
ment (blood pressure and pulse) in the memory every time a measurement
is completed.
THE DATA WILL BE KEPT IN THE MEMORY EVEN IF THE DEVICE IS
STORED WITHOUT BATTERIES. TO DELETE ALL VALUES STORED IN
THE MEMORY YOU SHOULD MAKE ACTIONS DESCRIBED IN “MEMORY
FUNCTION”.
If the Device is ON and is unused for 3 minutes it will be switched off
automatically.
AUTOMATIC RE-INFLATION
When during the
fi
rst blood pressure measurement the cuff in
fl
ation to a
level of 190 mmHg is not suf
fi
cient or you move your arm the Device stops
measurement and re-in
fl
ates the cuff to the higher level. The Device has 4
fi
xed levels of the arm cuff in
fl
ation: 190, 230, 270 and 300 mmHg.
The automatic re-in
fl
ation is repeated until the measurement is completed
successfully. This is not a defect.
FORCED DEFLATION FROM A CUFF
For rapid air release from of the arm cuff during arm cuff in
fl
ation or during a
measurement (slow de
fl
ation) press the O/I Button.
MEMORY FUNCTION
1. The result of every measurement (blood pressure and
pulse) is automatically stored in the Device memory.
IF THE NOTICE ON ERROR APPEARS THE
MEASUREMENT RESULT WILL NOT BE STORED.
2. The Device stores up to 30 sets of measured values
and the average
fi
gures of last 3 measurements. When
the number of measurements exceeds 30, the oldest
record is deleted to save the most recent values.
3. The Device stores up to 90 sets of meas-
ured values and the average
fi
gures of last 3
measurements. When the number of meas-
urements exceeds 30, the oldest record is
deleted to save the most recent values (Fig.
16). At second pressing on the M Button the
screen will show for a short time index “1”
(number of the memory cell) and after this
the recent measurement result (Fig. 17).
At each subsequent pressing on the M
Button the index of the next number of the
memory cell will
fl
ash and the content of this
cell will be displayed.
Fig. 16
Fig. 17
