Small Cape Cod Manual
Construction Manual © 2007 - 2008 Little Cottage Co. Page 16
91
92
93
94
95
96
Place the door on the spacer bar. Fasten
using only one screw per hinge. This way
if adjustments are needed you will not have
to undo all the screws. Use black head
screw for these.
Next install the top door piece. Try to cen-
ter the door between the header block and
the bottom door. If both doors work well,
install the rest of the screws and remove
spacer bar.
You will now begin to install 3 door pulls
(2 on the out side, and one on the inside at
the top). Install turner knob.
Install top door piece on the adult door.
Measure the doorway on the adult door,
34 inches. It should be very close to this
measurement in order for the adult door to
work.
Place the spacer bar by the adult door.
Again use only 1 black head screw per
hinge.
