Lithonia Lighting LZ Series, Инструкции

Страница: 2 / 5

9140053441 Rev. 1
2
INSTRUCTIONS – INSTALLATION
1. Mount exit enclosure to wall using (4) thru holes or optional mounting feet. (See Figure 3).
2. Remove cover screws (2) and open cover. (See Figures 1 and 2).
3. Dismount exit lens by removing lens screws (4). (See Figures 1 and 2).
4.
Connect ¾” conduit supply to ¾” hub on unit.
5. Hookup AC service to the connector assembly as follows:
Enclosure
Cover Screws (2)
Lens Screws (4)
¾” Hub
Vent Test Switch
Figure 1 Figure 2
AC/Charge IR Receiver
Status Indicator
120 VAC OPERATION 277 VAC OPERATION
Black Wire - 120V Line Blue Wire - 277V Line
White Wire - Common White Wire - Common
Green Wire - Ground Green Wire - Ground
Unused primary wire must be insulated to prevent shorting.