Never connect components under load.
Do not mount or support these
fi
xtures in a manner that can cut the outer jacket or damage wire insula on.
Unless individual product speci
fi
ca ons deem otherwise: Never connect an LED product directly to a dimmer packs,
occupancy sensors, ming devices, or other related control devices. LED
fi
xtures must be powered directly o
ff
a switched
circuit.
Unless individual product speci
fi
ca ons deem otherwise: Do not restrict
fi
xture ven la on. Allow for some volume of
airspace around
fi
xture. Avoid covering LED
fi
xtures with insula on, foam, or other material that will prevent convec on
or conduc on cooling.
Unless individual product speci
fi
ca ons deem otherwise: Do not exceed
fi
xtures maximum ambient temperature.
Only use
fi
xture in its intended loca on.
LED products are Polarity Sensi ve. Ensure proper Polarity before installa on.
Electrosta c Discharge (ESD): ESD can damage LED
fi
xtures. Personal grounding equipment must be worn during all
installa on or servicing of the unit.
Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
Some components inside the
fi
xture may not be serviceable. In the unlikely event your unit may require service, stop
using the unit immediately and contact an ABL representa ve for assistance.
Always read the
fi
xtures complete installa on instruc ons prior to installa on for any addi onal
fi
xture speci
fi
c warnings.
CAUTION: RISK OF PRODUCT DAMAGE
Please see product specifi c installation instructions for additional warnings or any applicable FCC or other regulatory statements.
Failure to follow any of these instructions could void product warranties. For a complete listing of product Terms and Conditions, please visit www.acuitybrands.com.
Our Brands
Indoor/Outdoor
Indoor
Lighting
Outdoor
Lighting
Controls
Daylighting
Lithonia Lighting
Gotham
American Electric Lighting
DARK TO LIGHT
SunOptics
Carandini
Mark
Architectural
Lighting
Antique
Street
Lamps
LC&D
Holophane
Peerless
Hydrel
ROAM
RELOC
Renaissance Ligh ng
Tersen
Sensor
Switch
Light
Concepts
Winona
Lighting
Synergy
Acuity Brands Lighting, Inc. assumes no responsibility for claims arising out of improper or careless installation or handling of its products.
ABL LED General Warnings, Form No. 503.203
© 2010 Acuity Brands Lighting, Inc. All rights reserved. 12/01/10