OmniWah v2.0
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
13
Off board wiring
The version 2 of the OmniWah has been designed to be used in a standard Crybaby enclosure with
either onboard soldered jacks or separate jacks (like the neutrik/rean type of input jacks). There are
also 4 holes added for PCB stands in case you want to use a custom enclosure (1590BB).
Potentiometers
In the pictures below you see the correct pin numbering of the pots (Alpha 16mm style and/or
onboard 6mm).
Solder the wires accordingly and it is always a good idea to twist the wires together to create a sort
of extra shielding against external noise.
You can break off the pin I marked with the yellow circle with a small pair of pliers.
Footswitch with PCB mounted input and output
1k (only for BBE Ben Wah)
C
at
hod
e
(s
hor
t
le
g)
Ano
de
(
lon
g
le
g)
R Led
In this case you will need to populate
DC1
,
CONN
IN
and
CONN
OUT
with PCB mounted jacks. Note
that
R led
is a
4k7
resistors. You can change this value depending on the type of LED you use but 4k7
is safe enough for almost all LEDs @ 9V.
P1 Volume
P2 Gain
P3 Voice
1 2 3
P4 Wah
P5 Sweep
Содержание OmniWah
Страница 1: ...OmniWah Building instructions V2 0 ...
