background image

Troubleshooting.

Warranty.

Litex 30-Year Limited Warranty:
LITEX INDUSTRIES, LTD. warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY:  LITEX INDUSTRIES, LTD. will replace or 
repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer 
Service at 1-800-527-1292 to arrange for return of fan. 
Return fan, shipping prepaid to Litex Industries, Ltd. We will 
repair or ship you a replacement fan, and we will pay the 
return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or 
replace at no charge to the original purchaser any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex 
Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
6 TO 30-YEAR  WARRANTY: LITEX INDUSTRIES,LTD. will 
repair at no charge to the original purchaser if the fan 
motor fails to operate satisfactorily when failure results 
from normal use. Parts used in the repair will be billed to 
the purchaser at prevailing prices at time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Litex Industries nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

Parts Replacement.

For parts and information please refer to "Parts 
Inventory" on page two.
Customer Support:
1.800.527.1292
www.litexfans.com

page 9

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely in 
either direction.
3. Be sure fan is wired properly.

Problem: 

Light kit not lighting.

Solutions:

1. Check wall switch to fan.
2. Check that bulbs are installed correctly.
3. Be sure wires in canopy are wired properly.

Problem: 

Fan wobbles.

Solution:

1. Use the balancing kit in your hardware pack. 

Содержание ULT52AB5











Отзывы: