7. Canopy Assembly.
page 6
8. Blade Assembly.
Time Saver:
Washers for blade screws can
be set on each blade screw prior to installing
blades.
Locate 15 blade attachment screws and
washers in one of the hardware packs. Hold
blade arm up to blade and align holes. Insert
3 blade attachment screws (along with
washers) with fingers first, and then tighten
screws securely with Phillips screwdriver.
Repeat procedure for remaining blades.
Remove blade arm screws and lock washers
from fan motor and set aside. Then, if
applicable, remove plastic motor locks and
discard. Align blade arm holes with motor
screw holes and attach blade arm with lock
washers and blade arm screws. Before
securing screws permanently, repeat this
procedure with remaining blade arms.
Secure all screws.
blade arm screws
lock washers
motor housing
blade arm
blade
blade attachment
screws and washers
canopy
hanging
bracket
screw
If necessary, partially loosen the 2 screws on
the bottom of the hanging bracket. Raise
canopy to hanging bracket, aligning rounded
part of holes in canopy with loosened screws
in hanging bracket, and push up. Twist
canopy to lock. Secure both screws with
Phillips screwdriver.
plastic
motor
lock
screw
