hanging bracket tab
hanging ball slot
5. Fan Assembly. (cont.)
With the hanging bracket secured to the outlet box and
able to support the fan, you are now ready to hang your
fan. Grab the fan firmly with two hands. Slide downrod
through opening in hanging bracket and let hanging
ball rest on the hanging bracket. Turn the hanging ball
slot until it lines up with the hanging bracket tab.
Tip
: Seek the help of another person to hold the
stepladder in place and to lift the fan up to you once you
are set on the ladder.
Continue to wiring section for wiring diagram.
page 5
6. Wiring.
black
black
from fan
from ceiling
white
white
blue
black supply wire
ground
(green
or bare)
white supply wire
Important
:
Be sure outlet box is properly grounded
or that a ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to below, please use a
qualified electrician.
When fan is secured in place on the hanging
bracket, electrical wiring can be made (
diagram 1
)
as follows:
Connect
BLACK
and ¹
BLUE
wire from fan to
BLACK
wire from ceiling with wire connector
provided.*
Connect
WHITE
wire from fan to
WHITE
wire from
ceiling with wire connector provided.*
Connect all
GROUND
(
GREEN
) wires together
from fan to
BARE
/
GREEN
wire from ceiling with
wire connector provided.*
¹ If you intend to control the fan light with a
separate light switch, connect
BLUE
wire from fan
to the
BLACK
supply from the independent
switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
This fan is remote control adaptable (remote control
sold separately).
diagram 1
*
ground
(green
or bare)
wire
connec-
tors
wire
connector
