Litex KA52NI5CM Скачать руководство пользователя страница 9

8

Printed in China

WARRANTY

TROUBLESHOOTING

 (continued from previous page)

Problem

 (cont.)  

Possible Cause

 (cont.)  

Corrective Action

 (cont.)

Excessive wobbling.  

1. Blades (H) are loose. 

1. 

Tighten all blade screws (K).

 

 

2. Blade arms (G) incorrectly attached. 

2. Re-install blade arms (G).

 

3. Unbalanced blades (H). 

3. 

Switch one blade (H) with a blade (H)

 

 

from the opposite side or use blade

 

 

balancing kit (O) included.

 

4. Fan not securely mounted. 

4. Turn power off. Carefully loosen

 

 

canopy (B) and verify that mounting

 

 

bracket (C) is secure.

 

5. Fan too close to vaulted ceiling. 

5. Use a longer downrod (A) or move fan

 

 

to another location.

 

6. Set screw(s) on motor housing yoke 

6. Tighten yoke set screw(s) securely.

 

is (are) not tightened properly.

 

7. Set screw on hanging ball is not 

7. Carefully loosen and lower canopy (B)

 

tightened properly. 

and verify that set screw on hanging ball

 

 

is tightened securely.

Fan operates but light fails 

1. Bulb(s) not installed correctly. 

1. Re-install bulb(s).

(if applicable). 

2. Wires in canopy (B) not wired properly. 

2. Check wires in canopy (B) and, if

 

 

necessary, re-wire according to

 

 

instructions on pages 4 and 5.

 

3. Wall switch to fan is off. 

3. Make sure that wall switch to fan is on.

Note:

  A small amount of "wobble" is normal and should not be considered a defect.

Parts Replacement.

For parts and information please refer to
"Parts Inventory" on page 3.
Litex Customer Support:

1-800-527-1292

LITEX LIFETIME LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will replace or repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer Service at 

1-800-527-1292

 to arrange for return of fan. 

Return fan, shipping prepaid, to Litex Industries, Ltd. We will repair or ship you a replacement fan, and we will pay the 
return shipping cost.
  5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or replace, at no charge to the original purchaser, any 
fan motor that fails to operate satisfactorily when failure results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
  6-YEAR to LIFETIME LIMITED WARRANTY: LITEX INDUSTRIES, LTD. will repair the fan, at no charge to the 
original purchaser for labor only, if the fan motor fails to operate satisfactorily when failure results from normal use. 
Parts used in the repair will be billed to the purchaser at prevailing prices at time of repair.
The purchaser shall be responsible for all costs incurred in the removal, reinstallation and shipping of the product for 
repairs.
This warranty does not apply when damage from mechanical, physical, electrical or water abuse results in causing the 
malfunction. Deterioration of finishes or other parts due to time or exposure to salt air is specifically exempted under 
this warranty.
Neither Litex Industries nor the manufacturer will assume any liability resulting from improper installation or use of this 
product. In no case shall the company be liable for any consequential damages for breach of this, or any other 
warranty expressed or implied whatsoever. This limitation as to consequential damages shall not apply in states where 
prohibited.

Содержание KA52NI5CM










Отзывы: