background image

 

READ AND SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

2

SAFETY INFORMATION

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for 

repairs, it must be shipped in its original packaging to ensure proper protection against damage 
that might exceed the initial cause for return.

• 

Make sure that all electrical connections comply with local codes, ordinances, the National 

Electrical Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself 
wiring handbook (available at Lowe's) if you are unfamiliar with installing electrical wiring.

 

• 

Make sure the installation site you choose allows a minimum clearance

 of 

10 ft. from the blades to 

the floor and at least 30 in. from the end of the blades to any obstruction.

• 

 After you install the fan, make sure that all connections are secure to prevent the fan from falling.

•  The net weight of this fan including the light kit is: 24.95 lbs. 

Safety Information .................................................................................................................2

Package Contents .................................................................................................................4

Hardware Contents ...............................................................................................................5

Preparation ...........................................................................................................................5

Initial Installation ...................................................................................................................6

Fan Mounting ........................................................................................................................7

Wiring ..................................................................................................................................10

Final Installation ..................................................................................................................11

Installing Fan Without Light Kit ............................................................................................13

Automated Learning Process/Activating Code ...................................................................14

Operating Instructions For Remote Control and Fan...........................................................15

Care and Maintenance ........................................................................................................16

Troubleshooting...................................................................................................................16

Limited Lifetime Warranty  ..................................................................................................17

Replacement Parts List .......................................................................................................17
 

Содержание JP13EB6CRS


















Отзывы: