Litex Industries GA24BNK6L Скачать руководство пользователя страница 6

page 5

6. Wiring.

WARNING

: Turn off circuit breakers to current 

fixture from breaker panel and be sure switch is 
turned to the OFF position.

CAUTION

Be sure outlet box is properly grounded 

and that a ground wire (

GREEN

 or Bare) is present.

Make sure all electrical connections comply with 
Local Codes or Ordinances and the National 
Electrical Code. If you are unfamiliar with electrical 
wiring or if the house/building wires are different 
colors than those referred to below, please use a 
qualified electrician.

Note: 

Excess lead wire length from the fan can be 

cut to the desired length and then stripped.

When downrod is secured in place on the hanging 
bracket, electrical wiring can be made as follows:
Connect 

BLACK 

and

 BLUE

 wires from fan to 

BLACK

 wire from ceiling with wire connector 

provided.
Connect 

WHITE

 wire from fan to 

WHITE

 wire from 

ceiling with wire connector provided.
Connect all 

GROUND 

(

GREEN

) wires together 

from fan to 

BARE

/

GREEN

 wire from ceiling with 

wire connector provided.

If you intend to control the fan light with a 
separate light switch, connect 

BLUE

 wire from fan 

to the 

BLACK

 (or 

RED

) supply from the 

independent switch. 

* Wrap each wire connector separately with 
electrical tape as an extra safety measure.

This fan is remote control adaptable (remote control 
sold separately).

wire

connector

black

white

black supply wire

ground
(green
or bare)

white supply wire

ground 
(green or bare)

*

5. Fan Assembly. (cont.)

With the hanging bracket secured to the outlet box 
and able to support the fan, you are now ready to 
hang your fan. Grab the fan firmly with two hands. 
Slide downrod through opening in hanging bracket 
and let hanging ball rest on the hanging bracket. Turn 
the hanging ball slot until it lines up with the hanging 
bracket tab.

WARNING

: Failure to align slot in hanging ball with 

tab in hanging bracket may result in serious injury or 
death.

Tip:

 Seek the help of another person to hold the 

stepladder in place and to help lift the fan up to you 
once you are set on the ladder. 

motor housing

hanging ball slot

hanging bracket tab

black

white

blue

from fan

from

ceiling

Содержание GA24BNK6L











Отзывы: