Liteville 601 Mk3, Руководство пользователя

Страница: 11 / 24

11
Changing the shifter cable housing
Leave the black tube in place.
Cut the new cable housing with a 45° cut as shown.
Spray some silicon spray into the black
tube. Guide the outer housing through the
black tube until it stops at the entry to the
right hand chainstay. Now, make a loop with
the remaining length of outer housing and
use this loop as leverage. Now turn and
push the outer housing until it finds its way
into the chainstay.
Tip: It will be easier for the cable to find its way if you move the rear end up and down approx. 1 - 2cm. To do
this, you will have to disconnect the shock at the rear shock mount.
Continue pushing the outer housing through the chainstay until it stops at the exit. By turning and pushing, let
the outer housing find its way out. To finish off, cut the end as usual. Done.
Alternative method
Cut off the “head” of an old shifter cable. Insert the old shifter cable through the plastic tube and through the
chainstay and ensure it exits at the rear. Now, slide the outer housing onto the old shift cable from the front,
and guide through the frame.
By turning and pushing of the outer housing let the housing end find its way through the chainstay and
through the plastic tube until it appears from the exit in the chainstay.
Remove old shift cable and cut outer housing to length as usual. Done