LPTC801 GB
4
Connect the link output of the master with the link input of the first slave. Next, connect the link
output of the first slave with the link input of the next slave, etc.
By connecting two LPTC801's (see above) it is possible to make a small 8-channel 19" theatre
console with 2 presets. Just screw the 2 panels together to get a 19" panel. Connect both output
B sockets from the first device to the output B sockets of the second one. Connect the A-
outputs of the second panel to the dimmer packs.
6. Operating Instructions
Use the slide controls to dim each channel, use the master slide control to dim all the channels
at once. Push the flash buttons to put individual channels to 100% immediately or the FULL-ON
button to put all channels to 100% output. Use the BLACK button to dim all the channels.
Choose with the chaser button which channels are included in the chase sequence. Adjust
chaser speed by turning the knob. Press the AUDIO button to make the chaser music-
controlled. Reverse the chaser direction by pushing the PROG button.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, mounting supports and connections should not be modified or tampered with
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections, …
3. The electric power supply cables should be undamaged. Have this device installed by a
qualified technician.
8. Caution
•
Disconnect the device from the mains prior to maintenance.
•
Use a moist cloth to clean the device and avoid the use of alcohol or solvents for cleaning
purposes.
•
This device does not contain any user-serviceable parts. Replace a blown fuse with an
identical one.
•
Spare parts should be ordered with your local dealer.