LPTC801 GB
3
programme a setting. From then on the settings are programmed. While in chaser mode,
press the button momentarily to reverse the direction of the chaser.
14. External audio input 6.35mm for mono jack.
15. 8-pin DIN link input socket.
16. 8-pin DIN link output socket.
17.
8-pin DIN socket for output B (channels 5-8).
18.
8-pin DIN socket for output B (channels 1-4).
19.
8-pin DIN socket for output A (channels 5-8).
20. 8-pin DIN socket for output A (channels 1-4).
5. Connections
The manufacturer or dealer will not be held responsible for damage caused by improper
connections. Connect the device to an appropriate dimmer/power pack (LPTP406) by
connecting the 8-pin DIN output A (channels 1 - 4 or channels 5 – 8) with the 8-pin DIN input
connection of the dimmer pack.
Connect your power packs to the sockets of output A and/or B.
The music control is achieved through the built-in microphone. However, you can connect an
external signal through the 6.35mm mono jack socket at the back of the device.
Connecting several LPTC801’s
Master/Slave Connection
