Lister Petter K1 64, Руководство оператора

Страница: 20 / 40

20
7.14 Maintenance Schedule
At all times continiously monitor engine performance.
Observe the correct oil and filter change periods as specified below.
Regular service
period
Item
Daily
First month
or 20 hours
Third
month or
100 hours
200 hours
Sixth
month or
500 hours
Yearly
or 1000
hours
Check and replenish fuel ○
Drain out fuel ○
Check and replenish
lub oil
○
Check for oil leakage ○
Check and tighten all
engine nuts and bolts
○
●Tighten
cylinder
head nuts
Change lub oil ○ Initial ○
Clean oil filter ○ ○
○(Change if
necessary)
Replace air filter element ○
Change fuel filter ○ Replace
Check fuel injection pump ● ●Change
Check fuel injection nozzle ●
Check fuel pipes
○(Change if
necessary)
Check and adjust inlet and
exhaust valve clearance
●Initial ●
Check inlet and exhaust
valve and seat condition
●
Replace piston rings ●
Check battery electrolyte Monthly (replenish with distilled water as necessary)
Note: ● means if you need special tools, please contact your nearest Lister-Petter Distributor
Change the lubricating oil and clean the oil filter for the first time at 20 hours and then as
specified in 7.14 Maintenance Schedule.
CAUTION
Continuous operation under heavy loads in ambient temperatures above 35°C (95°F)
causes the oil to deteriorate more quickly.
7. Engine Servicing