Lister Petter K1 64, Руководство оператора

Страница: 12 / 40

12
Figure 5.2.3 Engine Control - Variable Speed
4.Pull the rope handle until you feel ten-
sion. Let the rope rewind back into the
recoil start; in this way the entire length
of the starting rope can be used to start
the engine.
5. Push the decompressor lever down and
it will stay in the down position.
Figure 5.2.4 Decompressor Lever
6. Grip the handle with both hands.
7. Commence pulling the starting cable
vigorously (the decompressor lever will
return automatically to the run position)
and at increasing speed until the engine
starts.
8. If the engine does not start repeat proc-
ess from 3 - 6 again.
5. Operating Instructions
5.3 Electric Key Start
1. Ensure the decompressor lever is in the
running position.
Figure 5.3.1 Decompressor Lever - Run posi -
tion
2. Move the engine control lever (A) to the
'RUN' position.
Figure 5.3.2 Engine Control
3. If a variable speed control is fitted select
the fast position.
4. Turn the starter key clockwise to the ON
position. Any pilot lamps (if fitted) must
now light up.
5. If a heater plug is fitted turn the starter
key clockwise to the HEAT position and
hold it there for 20 seconds.
6. Turn starter key clockwise to the START
position and release it immediately after
the engine fires.
Do not operate the starter key for more
than 15 seconds at a time.
A