Lister Petter K1 64, Руководство оператора

Страница: 18 / 40

18
7.8 Cleaning the Oil Filter
1. Before changing the filter, read "7.2 Pre -
cautions for Oil, Filters and Elements".
2. Remove drain plug and drain oil into a
suitable container.
3. Unscrew the retaining screw (A) and pull
out the oil filter from the crankcase.
Figure 7.8.1 OIl filter securing bolt
Figure 7.8.2 Oil Filter
4. Clean the oil filter in diesel fuel.
5. Clean the crankcase ‘O’ ring housing
face.
6. Fit a new ‘O’ ring if damaged.
7. Refit the filter and tighten retaining screw
'A' to 10Nm (7.5lb ft).
CAUTION
The retaining screw must not be over
tightened.
8. Run the engine and check for any oil
leaks.
7.11 Changing the Fuel Filter
Before changing the filter, read "7.2
Precautions for Oil, Filters and Elements".
1. Drain the fuel tank.
2. Remove the two 6mm nuts which secure
the fuel tap assembly.
7. Engine Servicing
A
9. Stop the engine, allow the oil to settle
and check the level on the dipstick.
10.Add more oil if necessary.
7.9 Sump Capacity
Type
litres pints US qts
K1 72 1.65 2.9 1.75
K1 64 1.1 1.95 1.2
7.10 Capacity Between Dipstick
Marks
Type
litres pints US qts
K1 72 0.55 1.0 0.6
K1 64 0.4 0.73 0.45
Figure 7.11.1
Fuel Filter Element