L R - 4 2 0 0 - I R I D S P R E C E I V E R M A N U A L
l
PAGE 8
4. Connect Ear Phone
Using The Ear Phone/Neck Loop Lanyard
Connect the Listen Intelligent ear
phone/neck loop lanyard to the
two 3.5 mm output jacks on the
unit. Then connect the short cable
ear speaker or headphones to
the 3.5mm output jack on the
lanyard. The lanyard neck loop
is placed over the head and
worn as a necklace.
Using The 3.5mm Earphone Extension Cable
If the receiver is to be clipped to a belt or waistband a long extension cable is used. Connect the
extension cable to the ear speaker, headset or earphones, then connect the extension cable into one
of the 3.5 mm output jacks on top of the receiver.
Headset
Ear Phone/
Neck Loop
Lanyard
Ear
Speaker
Earbuds
Headset
Ear
Speaker
Extension
Cable
Earbuds
This is the preferred method of
wearing the receiver for best
performance!
For T-coil compatible hearing aid
use simply disconnect the ear
speaker or headset from the ear
phone/neck loop lanyard.
Important: Always wear the receiver
in such a way that there is nothing
covering the receiver, if covered or
obstructed the receiver will have
poor range and performance!
