background image

PAGE 3    

l

        L R - 4 2 0 0 - I R   I D S P   R E C E I V E R   M A N U A L

iDSP-IR Receivers  

The LR-4200 is a powerful Assistive Listening Receiver designed to be compact and simple to use. The 
unique design of the iDSP™ receiver family allows them to be worn as a necklace, making this the 
most inconspicuous ALS receiver on the market. 

Each receiver can be purchased with Ear Phone/Neck Loop Lanyard that is designed to hold the 
receiver like a necklace similar to the Blue Tooth™ transceivers used with many of the today’s hearing 
aids. The Ear Phone/Neck Loop Lanyard can be used as the induction loop for those users who have 
T-coil enabled hearing aids or cochlear implants, inducing the received audio directly into these T-coil 
enabled devices. The Ear Phone/Neck Loop Lanyard also provides the connection to Listen’s Universal 
Ear Speaker, Earphones and Headphones, incorporating a short connection cable that plugs directly 
into the Ear Phone/Neck Loop Lanyard’s 3.5mm headset jack located 2/3 of the way up the lanyard. 
A second 3.5mm extension cable provided with Listen’s universal earphones provides the length of 
cable required to use the belt clip.

Earbuds

Ear Speaker

Headset

Belt Clip

Hearing Aid

T-Coil

Ear Phone/
Neck Loop 

Lanyard

Extension 

Cable

Содержание LR-4200-IR





















Отзывы: