PAGE 15
l
L R - 4 2 0 0 - I R I D S P R E C E I V E R M A N U A L
Stereo Mode
When Stereo Mode is enabled the receiver can receive and output a stereo signal to the connected
headphones. This feature can only be used in conjunction with the ListenIR LT-82 / LA-140 system. In
order for this feature to function properly the stereo mode must be enabled on both the receiver and
the LT-82 Transmitter. Stereo mode has two settings ON and OFF. Your Listen receiver has been shipped
to you in the Stereo OFF Mode.
Unit Information
When a unit is connected to the configuration software the software extracts specific information from
the unit and displays it for the user. This information includes the model number, frequency, Serial
Number and Firmware Version.
Reset to Factory Defaults
The unit can be returned to the factory default settings.
Note: When resetting the unit to factory default via the software the unit ID is not reset.
Firmware Update
The firmware update function will check via the internet to see if a firmware update is available for
the receiver.
Note: Battery level must be greater than 10% to perform a firmware update!
