12/30
1.4.6.
Special work while using the machine
1.4.6.1
Follow all setup, maintenance, and inspection activities and schedules prescribed by the operating
manual, including all information about the replacement of parts / assemblies! These activities
may only be carried out by technical personnel.
1.4.6.2
Inform operating personnel before beginning special and maintenance work! Name a supervisor!
1.4.6.3
If the machine is turned off during maintenance and repair work, it must be secured against
unexpected application of power.
1.4.6.4
Before cleaning all openings in which no cleaning agent should penetrate due to safety and/or
functional reasons must be covered and glued. Electric motors, switches and plugs are especially
at risk. After cleaning, remove the covers/tape completely!
1.4.6.6
During service and repair work, always tighten again loose bolt joints!
1.4.6.7
If dismantling is required for fitting, servicing and repair, the safety fittings must be remounted
and checked immediately following the service and repair work!
1.5.
Safety instructions for special types of dangers
1.5.1.
Electric power
1.5.1.1
Use only original fuses with the specified current rating! In case of malfunctions, turn off the
machine immediately! Electrical work may only be carried out by technical and qualified
personnel.
1.5.1.2
Carry out maintenance or repair work only when the motor of the waste water suction is turned
off. Transport position requires special care.
1.5.1.3
The machine's electrical equipment must be inspected/checked regularly. Faults such as loose
connections or damaged cables must be corrected immediately. The machine must be labelled so
that it cannot be started by others.
1.5.2.
Dust
1.5.2.1
When working in close quarters, follow any applicable national guidelines!
1.5.3.
Noise
1.5.3.1
see 2.3 Noise power level of the machine
