25
9. Accessories
9.1. Cutting with the table extension
- Press the clamping lever to the left
- Pull out the table extension
- Lift up the support plate
- Pull back the table extension until the support plate touches the table
- Press the clamping lever to the right
Further insert possibilities for long bricks:
- Pull out the whole table extension and clamp it on. (Don’t fold the
Support upwards)
9.2. Table extension as limit stop by release-cuts
- Push clamping lever to the left
- Pull out the table extension
- Lift up the support plate
- Pull back the table extension until the support plate act as a limit stop for the
brick
- Push the clamping lever to the right
