Select that application, download it and install it. Please note that the application
must be downloaded directly to your phone - it is not possible to install the
application by downloading by some other method and then transferring it to
your phone.
When downloading the application you might be asked where it should be
installed, e.g. to the phone memory or to the memory card. The phone memory
is preferable as this will always be present, but either location is acceptable.
Once the installation has been completed you will probably be offered the option
to start/run the application or to close it. If you choose ‘Start’ you will arrive at
the Digidown Application welcome page or, on some handsets you will be asked
to begin configuring the application by choosing a language.
Running the Digidown Application
To run the Digidown Application, first locate where it has been installed. This can
vary from one phone to another. Usually this application will be found in the
phone’s ‘Applications’ folder or in the ‘Games’ folder. Select and run the
application.
Many phones provide a facility to set a short-cut to chosen applications. This can
make it very easy to find and start the Digidown Application. Please consult the
instructions for your phone for information on how to set up short cuts.
Phone Application Settings
When you start the Digidown Application for the first time, the setup wizard will
launch.
Some phones will initially ask you to choose a language, then all phones will
display a welcome screen. Press ‘Next’ to proceed.
The first stage of setup tests the Bluetooth connection to your Digidown unit.
You will be asked to press and hold the Bluetooth button on the Digidown Blue or
activate your Digidown CR by inserting a card and waiting for the Bluetooth light
to start flashing, and then press ‘Next’ on the phone. A brief test is carried out
whereby the phone searches for the Digidown unit, connects to it and then
exchanges brief messages. Some phones may ask that you pair with the
Digidown unit at this stage, if so, enter the PIN
6543
. Provided that this is
successful then the success will be reported by the phone. Press ‘Next’ to move
on.
On the next setup page please enter your name and your e-mail address:
‘Your name’ should usually be your personal name (e.g. Joe Bloggs).
Alternatively it could be some other name which identifies the person or people
using the phone, maybe the company name and/or department, e.g. ‘Joe Bloggs
Transport Phone 1’.
‘Your E-mail Address’ is used as the ‘from’ e-mail address when downloaded data
is sent by e-mail. It
must
be a valid e-mail address. It is common for e-mails
apparently being sent from invalid addresses to be treated as junk mail and not
delivered.
